Painting Furniture: A Few Guidelines

There are many times that we see our furniture and wish we could change it without really spending a lot of money. One way to do it would be to buy second-hand furniture or rent a new piece. But if neither sound good enough for you, painting it could become a great Do-It-Yourself project and you could save a ton of money doing it as well.
These days all you need to do is go online and you will get a ton of references about how to complete any project. While these are extremely helpful, the information many times is incomplete or not sufficient for a piece of furniture. There are many techniques that are used to paint over your furniture but it is best to start with the basics. Use a technique that is not very elaborate and does not have too many steps involved. This way your project will be completed soon and you will feel confident to take on further projects.
In order paint over wooden furniture, there are some basic steps that need to be undertaken. They are as follows:

Sanding:

Sanding is a technique when you bring the furniture to a state of readiness to accept the primer you will be using on the wooden furniture. The primer will not adhere if the surface is smooth. If the wooden furniture you are dealing with has a shine or polish, it is essential you use a tougher sand paper to roughen up the surface. Generally, a 150-grit sandpaper is used to sand all sides of the furniture. Be careful not to make deeper marks on the wood as this may be difficult to hide or repair when you must ultimately paint it. As mentioned if your furniture has a varnish, make sure you use an 80-grit paper to sand it down.

Removing Residue:


Once you have sanded the piece, it is important to get all the dust out from the piece before you oil or paint it. There are a couple of diverse ways people like to do it. One way is to use a brush to get the dust completely out, but a hand brush does not get the fine dust out. One can also use a vacuum equipped with the brush attachment. This may solve the problem to a considerable extent. However, what works best, in this case, is what is called a tack cloth (it is a cloth that comes with some sort of glue- available in most hardware stores). You wipe the furniture down with this and the surface is ready for the next process. Take care not to use a wet cloth as it may damage the wood. The interior trends you'll be loving in 2017 - Domain

You can use either a brush, roller or a spray to paint the primer on.

Earlier, there was only the option of a slow, oil-based primer which would take ages to dry but was best because it soaked completely into the wood allowing for the top coat to shine. However, the only drawback was the drying time. Now, with time and technology, there are many kinds of primers available for diverse kinds of wood we use Delivery process - Danetti.com. These primers offer the advantages of quick-drying yet effective in proper adhesion of the paint.

Paint and Protect

You should always apply three thin coats of any latex paint that you choose. Ensure that you sand in between coats and give at least 5-6 hours in between each coat of paint. To protect your piece, ensure that you cover the furniture with polyacrylic water-based protectant. Avoid using the furniture for at least 72 hours as it can take the time to dry.

Priming your furniture:

This is probably one of the most critical stages of painting your wood. How well you paint the primer on your wood will determine the final finish of the product. Some important pointers in this regard.

Testimonials

Our Team

sign up for our newsletter

Contact